Advanced Technical Ceramic Materials
Comprehensive material portfolio engineered for demanding semiconductor, aerospace, medical, and industrial applications. Direct-factory precision machining with complete material traceability and metrology validation.
What Advanced Ceramic Materials Does Korecera Manufacture?
Korecera machines six families of advanced technical ceramics: Alumina (Al₂O₃), Zirconia (ZrO₂), Silicon Carbide (SiC), Silicon Nitride (Si₃N₄), Aluminum Nitride (AlN) and Boron Nitride (BN). Material selection depends on the application requirements, including mechanical load, thermal environment, electrical insulation, wear conditions, chemical exposure and dimensional precision. Each material has distinct property trade-offs. The matrix below summarizes key characteristics to support engineering decisions.
Material Selection Matrix
Key properties at a glance. Typical values may vary by grade and test condition. Detailed data sheets available for each material.
| Material | Formula | Key Mechanical | Thermal Cond. | Electrical | Wear | Typical Use | Details |
|---|---|---|---|---|---|---|---|
| Alumina | Al₂O₃ | High hardness (≥1500 HV), good compressive strength | 27 W/m·K | Strong insulator (≥15 kV/mm) | High wear resistance | Substrates, insulators, wear parts, semiconductor fixtures | Learn More |
| Zirconia | ZrO₂ | High flexural strength (1000 MPa), highest fracture toughness (≥6.0 MPa·m½) | 2.5 W/m·K | Insulator (≥10 kV/mm) | Excellent wear + transformation toughening | Springs, nozzles, medical tools, high-stress mechanical parts | Learn More |
| Silicon Carbide | SiC | High stiffness (405 GPa), high hardness (≥2200 HV) | 120 W/m·K | Insulator (≥15 kV/mm) | Very high wear and corrosion resistance | Semiconductor wafer handling, mirror optics, high-temp structural parts | Learn More |
| Silicon Nitride | Si₃N₄ | High strength (700 MPa), high toughness (≥5.0 MPa·m½) | 22 W/m·K | Insulator (≥15 kV/mm) | Good wear resistance, low CTE | Bearing balls, high-temp structural, welding fixtures | Learn More |
| Aluminum Nitride | AlN | Moderate strength (310 MPa), moderate hardness (≥1000 HV) | 170–190 W/m·K (typical 180 W/m·K) | Insulator (≥15 kV/mm) | Moderate wear resistance | Thermal management substrates, semiconductor heat spreaders, DBC substrates | Learn More |
| Boron Nitride | BN | Low hardness (1–2 Mohs), machinable | 30–50 W/m·K (anisotropic) | Strong insulator (≥25 kV/mm) | Low wear, self-lubricating | Release liners, crucibles, vacuum furnace fixtures, non-wetting surfaces | Learn More |
How to Select a Technical Ceramic
Material selection involves balancing multiple performance requirements. The following dimensions guide the decision process.
Thermal Conductivity
High heat transfer (AlN, SiC) vs. thermal barrier (ZrO₂).
Fracture Toughness
Impact and crack resistance (ZrO₂, Si₃N₄) vs. brittle materials (Al₂O₃).
Electrical Insulation
Dielectric strength and volume resistivity for substrate and insulator applications.
Wear Resistance
Hardness and abrasion resistance for sliding, sealing and flow-contact components.
Thermal Expansion (CTE)
Matching CTE to metals or semiconductors for thermal cycling environments.
Machinability
BN is machinable pre-sintering; other technical ceramics require diamond tooling post-sinter.
Service Temperature
Maximum continuous use temperature in air vs. inert atmosphere.
For application-specific guidance, see our Applications overview or contact our engineering team for DFM support.
Alumina Ceramic (Al₂O₃)
High purity aluminum oxide ceramics (95% to 99.9%) with excellent mechanical strength, electrical insulation and wear resistance. Standard choice for semiconductor processing and industrial applications.
Direct-factory precision machining with complete material traceability and metrology validation for Alumina Ceramic (Al₂O₃) components.
Key Material Properties
Alumina Ceramic Tubes & Rods
Alumina Substrates & Insulators
High-Value Applications
Alumina Ceramic Tubes & Rods
Semiconductor processing chambers, electrical insulators, thermocouple protection tubes, wear-resistant components
Available Shapes: Tubes, rods, plates, rings, custom shapes
Alumina Substrates & Insulators
LED substrates, electronic packages, high-voltage insulators, circuit boards
Available Shapes: Substrates, plates, custom insulators
Zirconia Ceramic (ZrO₂)
Yttria-Stabilized Zirconia (YSZ) with exceptional fracture toughness, high impact durability and superior surface finish. Optimized for precision structural components.
Direct-factory precision machining with complete material traceability and metrology validation for Zirconia Ceramic (ZrO₂) components.
Key Material Properties
High-Value Applications
Fiber optic ferrules, precision pistons, valve seats, wear-resistant shafts and bushings
Available Shapes: Rings, pins, shafts, bushings, custom geometries
Silicon Nitride Ceramic (Si₃N₄)
Conventionally sintered Silicon Nitride with superior thermal shock resistance, extreme mechanical toughness and high fatigue limits. Engineered for severe-service structural applications.
Direct-factory precision machining with complete material traceability and metrology validation for Silicon Nitride Ceramic (Si₃N₄) components.
Key Material Properties
High-Value Applications
High-temperature ball bearings, probe card insulating plates, pick-and-place nozzles, lift pins
Available Shapes: Rings, plates, nozzles, pins, custom shapes
Silicon Carbide Ceramic (SiC)
Sintered and Reaction-Bonded Silicon Carbide with extreme microhardness, superior thermal conductivity and excellent erosion resistance. Ideal for abrasive and high-temperature environments.
Direct-factory precision machining with complete material traceability and metrology validation for Silicon Carbide Ceramic (SiC) components.
Key Material Properties
High-Value Applications
Wafer vacuum chucks, mechanical seal faces, focus rings, spray nozzles
Available Shapes: Plates, rings, nozzles, blocks, custom shapes
Aluminum Nitride Ceramic (AlN)
High-thermal grade Aluminum Nitride with thermal conductivity >=170 W/m.K and electrical insulation. CTE closely matches Silicon wafers for AI hardware and power electronics.
Direct-factory precision machining with complete material traceability and metrology validation for Aluminum Nitride Ceramic (AlN) components.
Key Material Properties
High-Value Applications
GPU/TPU chip carrier submounts, RF insulators, laser diode submounts, heater plates
Available Shapes: Substrates, plates, blocks, custom shapes
Boron Nitride Ceramic (BN)
Hot-Pressed Boron Nitride with outstanding thermal shock resistance, chemical inertness and self-lubrication. Optimized for vacuum furnace fixtures and molten metal handling up to 1800C.
Direct-factory precision machining with complete material traceability and metrology validation for Boron Nitride Ceramic (BN) components.
Key Material Properties
High-Value Applications
Vacuum furnace fixtures, crucible liners, thermocouple sheaths, spacer blocks
Available Shapes: Blocks, tubes, crucibles, custom shapes
Validate Your Precision Ceramic Blueprint with Korecera
Submit your 2D engineering blueprints or 3D CAD files (.STEP / .IGS) below. Our expert engineering team will conduct an in-depth Design-for-Manufacturability (DFM) review and deliver a competitive direct-factory quote. Fast-track prototyping completed within 7-10 business days. Full FAI, OQC, and material traceability reports provided upon delivery.
NDA protection is available for customer drawings, specifications and project information.