Technische Keramikmaterialien

Hochleistungskeramik für anspruchsvolle industrielle Anwendungen in verschiedenen Branchen

Alumina Ceramic (Al₂O₃)

High purity aluminum oxide ceramics (95% to 99.9%) with excellent mechanical strength, electrical insulation and wear resistance. Standard choice for semiconductor processing and industrial applications.

Alumina Ceramic (Al₂O₃)

Alumina Ceramic Tubes & Rods

Haupteigenschaften

Hardness: HV0.5 >= 15 GPa
Density: 3.60 - 3.90 g/cm3
Dielectric Strength: >= 15 kV/mm
Thermal Conductivity: 25 - 30 W/m.K

Anwendungen

Semiconductor processing chambers, electrical insulators, thermocouple protection tubes, wear-resistant components

Verfügbare Formen

Tubes, rods, plates, rings, custom shapes

Alumina Substrates & Insulators

Haupteigenschaften

Dielectric Strength: >= 15 kV/mm
Volume Resistivity: >= 10^14 Ohm.cm
Thermal Conductivity: 25 - 30 W/m.K

Anwendungen

LED substrates, electronic packages, high-voltage insulators, circuit boards

Verfügbare Formen

Substrates, plates, custom insulators


Zirconia Ceramic (ZrO₂)

Yttria-Stabilized Zirconia (YSZ) with exceptional fracture toughness, high impact durability and superior surface finish. Optimized for precision structural components.

Zirconia Ceramic (ZrO₂)

Zirconia Precision Components

Haupteigenschaften

Fracture Toughness: K1C >= 6.0 MPa.m1/2
Flexural Strength: 900 - 1100 MPa
Density: 6.00 - 6.05 g/cm3

Anwendungen

Fiber optic ferrules, precision pistons, valve seats, wear-resistant shafts and bushings

Verfügbare Formen

Rings, pins, shafts, bushings, custom geometries


Silicon Nitride Ceramic (Si₃N₄)

Conventionally sintered Silicon Nitride with superior thermal shock resistance, extreme mechanical toughness and high fatigue limits. Engineered for severe-service structural applications.

Silicon Nitride Ceramic (Si₃N₄)

Silicon Nitride Structural Parts

Haupteigenschaften

Fracture Toughness: K1C >= 5.0 MPa.m1/2
Thermal Shock Resistance: DeltaT >= 550C
Flexural Strength: 650 - 750 MPa

Anwendungen

High-temperature ball bearings, probe card insulating plates, pick-and-place nozzles, lift pins

Verfügbare Formen

Rings, plates, nozzles, pins, custom shapes


Silicon Carbide Ceramic (SiC)

Sintered and Reaction-Bonded Silicon Carbide with extreme microhardness, superior thermal conductivity and excellent erosion resistance. Ideal for abrasive and high-temperature environments.

Silicon Carbide Ceramic (SiC)

Silicon Carbide Wear Parts

Haupteigenschaften

Hardness: HV0.5 >= 22 GPa
Thermal Conductivity: 110 - 130 W/m.K
Elastic Modulus: 400 - 410 GPa

Anwendungen

Wafer vacuum chucks, mechanical seal faces, focus rings, spray nozzles

Verfügbare Formen

Plates, rings, nozzles, blocks, custom shapes


Aluminum Nitride Ceramic (AlN)

High-thermal grade Aluminum Nitride with thermal conductivity >=170 W/m.K and electrical insulation. CTE closely matches Silicon wafers for AI hardware and power electronics.

Aluminum Nitride Ceramic (AlN)

Aluminum Nitride Thermal Substrates

Haupteigenschaften

Thermal Conductivity: 170 - 190 W/m.K
Dielectric Strength: >= 15 kV/mm
CTE: 4.3 - 4.6 x10^-6/K

Anwendungen

GPU/TPU chip carrier submounts, RF insulators, laser diode submounts, heater plates

Verfügbare Formen

Substrates, plates, blocks, custom shapes


Boron Nitride Ceramic (BN)

Hot-Pressed Boron Nitride with outstanding thermal shock resistance, chemical inertness and self-lubrication. Optimized for vacuum furnace fixtures and molten metal handling up to 1800C.

Boron Nitride Ceramic (BN)

Boron Nitride High-Temp Components

Haupteigenschaften

Thermal Shock Resistance: Excellent
Max Service Temp: 900C air / 2000C vacuum
Dielectric Strength: >= 25 kV/mm

Anwendungen

Vacuum furnace fixtures, crucible liners, thermocouple sheaths, spacer blocks

Verfügbare Formen

Blocks, tubes, crucibles, custom shapes

Technische Datenblätter benötigt?

Laden Sie detaillierte Materialdatenblätter herunter oder fordern Sie kundenspezifische Spezifikationen an

Materialspezifikationen anfordern